february 2008 rev 1 1/8 8 BULT106D high voltage fast-switching npn power transistor features npn transistor low spread of dynamic parameters minimum lot-to-lot spread for reliable operation very high switching speed applications compact fluorescent lamps at 110v a.c. mains flyback and forward single transistor low power converters at 110v a.c. mains description the device is manufactured using multi-epitaxial planar technology for high switching speeds and medium voltage capability. it uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide rbsoa. the device is designed for use in lighting applications and low cost switch-mode power supplies. figure 1. internal schematic diagram table 1. device summary 3 2 1 sot-32 order code marking package packaging BULT106D BULT106D sot-32 tube www.st.com obsolete product(s) - obsolete product(s)
BULT106D 2/8 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 obsolete product(s) - obsolete product(s)
BULT106D electrical ratings 3/8 1 electrical ratings table 3. thermal data table 2. absolute maximum rating symbol parameter value unit v ces collector-emitter voltage (v be = 0) 400 v v ceo collector-emitter voltage (i b = 0) 230 v v ebo emitter-base voltage (i c = 0) 9 v i c collector current 2 a i cm collector peak current (t p < 5ms) 4 a i b base current 0.4 a i bm base peak current (t p < 5ms) 0.8 a p tot total dissipation at t c = 25 c 32 w t stg storage temperature -65 to 150 c t j max. operating junction temperature 150 c symbol parameter value unit r thj-case thermal resistance junction-case __ max 3.9 c/w obsolete product(s) - obsolete product(s)
electrical characteristics BULT106D 4/8 2 electrical characteristics (t case = 25 c unless otherwise specified) table 4. electrical characteristics symbol parameter test conditions min. typ. max. unit i ces collector cut-off current (v be = 0) v ce = 400 v 100 a i ceo collector cut-off current (i b = 0) v ce = 230 v 250 a v ebo emitter-base voltage (i c = 0) i e = 10 ma 9v v ceo(sus) (1) 1. pulsed duration = 300 s, duty cycle 1.5%. collector-emitter sustaining voltage (i b = 0) i c = 10 ma 230 v v ce(sat) (1) collector-emitter saturation voltage i c = 0.5 a _ i b = 0.1 a i c = 1 a _ i b = 0.2 a i c = 2 a _ _ i b = 0.4 a 0.4 0.8 1.2 v v v v be(sat) (1) base-emitter saturation voltage i c = 2 a _ i b = 0.4 a 1.5 v h fe dc current gain i c = 10 ma v ce = 5 v i c = 1 a v ce = 5 v i c = 3 a v ce = 10 v 10 10 4 20 30 v f diode forward voltage i c = 2 a 2v obsolete product(s) - obsolete product(s)
BULT106D package mechanical data 5/8 3 package mechanical data in order to meet environmental requirements, st offers these devices in ecopack? packages. these packages have a lead-free second level interconnect. the category of second level interconnect is marked on the package and on the inner box label, in compliance with jedec standard jesd97. the maximum ratings related to soldering conditions are also marked on the inner box label. ecopack is an st trademark. ecopack specifications are available at: www.st.com obsolete product(s) - obsolete product(s)
package mechanical data BULT106D 6/8 dim. mm. min. typ max. a2.4 2. 9 b 0.64 0. 88 b1 0. 39 0.6 3 d 10.5 11.05 e7.4 7. 8 e 2.04 2.2 9 2.54 e1 4.07 4.5 8 5.0 8 l15. 3 16 p2. 93 .2 q 3 . 8 q1 1 1.52 h2 2.15 i1.27 s ot- 3 2 (to-126) mechanical data 0016114e obsolete product(s) - obsolete product(s)
BULT106D revision history 7/8 4 revision history table 5. document revision history date revision changes 27-feb-2008 1 initial release. obsolete product(s) - obsolete product(s)
BULT106D 8/8 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at an y time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorize representative of st, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems, where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as ?automotive grade? may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, an y liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2008 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com obsolete product(s) - obsolete product(s)
|
